All-In-One Compact Line Array
- "All In One Line Array System"
- FlatWave Former (Wave Shaping Device)
- DownFill Wave Former (Wave Shaping Device)
- "AIM" Acoustic Intergrading Module
- Tour grade enclosure and mechanics
- Controlled Symmetrical Pattern Control
Click Here For Full Specifications
Frequency Response (-3dB)*
55 Hz – 18 kHz
Frequency Range (-10dB)
47 Hz – 20 kHz
60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6dB)
Horizontal: 160 Degrees
Vertical: 38 Degrees
Recommended Crossover Frequency
1.6k Hz (acoustic, active, external DSP)
RMS handling capacity**
LF: 1200 W
HF: 225 W
Maximum SPL @ 1 Meter***
135 dB ([WorxAudio] preset)
LF: 8” (203.2mm) x 6, 2” (50.8) voice coil
HF: 1” Exit (25.4mm) x 3, 1.75” (44.45) voice coil
LF = 5.2 ohms, HF = 3.2 ohms, Self Powered
LF = 4 ohms, HF = 8 ohms, BiAmped x (3) modules
Baltic birch plywood, engineered plastics, and aluminum frame
Two-part spray catalyzed Polyurea coating on plywood
14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Indoor use only
Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors
Neutrik® powerCON (AC) XLR M/F (In/Out) or DANTE
Internal bracket w/ threaded .375” Flying points (x17)
31.1875” H x 24.5” W x 18” D (792.0 mm x 622.3 mm x 457.2 mm)
161 lb. (73.02 kg)
170 lb. (77.10 kg) - approximate with carton
X3i-BiAmp, X3i-Passive, X3i-Powered
Digital Power Amp
2500W (x1) LF, 800W (x1) HF
Digital (100) program processing, LCD readout
XLR Transformer Isolated I/O
AC powerCON I/O
Frequency response and range measured on-axis with anechoic environment.
Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.
The X3 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material.
The X3 incorporates three (3) medium format 1" exit compression drivers coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The X3 has a Horizontal pattern of 160 degrees and a Vertical of 38 degrees. Six (6) cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi layered catalyzed Polyurea finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area.
The X3 is available in black or white exterior. The X3 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X3 an exceptional tool for any speaker system.